Product

RO Booster pump

The purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure--down to 35 psi, according to some membrane makers--but the reality is, you won't get a lot of water and the product water quality will be compromised if the unit runs below 45 psi. Low inlet pressure makes the unit produce more reject water, produce less drinking water, fill the storage tank more slowly, and produce lower quality water. RO units run well on typical city water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher.

POLO-80

VOLTS: 24 VDC

RATED CURRENT:1.2 A

PRESSURE: 110 PSI

CURRENT AT 70 PSI: 0.9 A

FLOW AT 80 PSI: 1.2 L/MIN

INLET PRESSURE: 40 PSI

POLO-100

VOLTS: 24 VDC

RATED CURRENT:1.2 A

PRESSURE: 140 PSI

CURRENT AT 70 PSI: 1.0 A

FLOW AT 80 PSI: 1.6 L/MIN

INLET PRESSURE: 40 PSI

POLO-150

VOLTS: 24 VDC

RATED CURRENT:2.5 A

PRESSURE: 140 PSI

CURRENT AT 70 PSI: 1.5 A

FLOW AT 80 PSI: 2.2 L/MIN

INLET PRESSURE: 40 PSI

POLO-300

VOLTS: 24 VDC

RATED CURRENT:4.5 A

PRESSURE: 160 PSI

CURRENT AT 70 PSI: 2.5 A

FLOW AT 80 PSI: 5.0 L/MIN

INLET PRESSURE: 80 PSI

POLO - HEAD

  • POLO Brand long durable pump head was introduced in 2006 for the first time in India.
  • POLO Pump Head gives high perform by no pressure leakage, no water leakage.
  • POLO Pump Head made by using world unique diaphragm it make in unbreakable.